鞋用樹脂
PU resin for shoe soles
華大化學集團作為較早進行聚氨酯鞋用樹脂生產的企業,堅持為客戶提供質量穩定、品質優良的產品并不斷豐富自身的產品線,可根據客戶個性化需求進行定制化的開發服務。
1
高硬度聚酯
High hardness polyester
HT-5885B/F-2260 |
1、特性:高硬度,中低密度 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:立跟鞋底,高坡跟 | |||||||||||||||||
Application:Sole for casual shoes and man shoes | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-5885B | 液狀或石蠟狀 | 600~1000 | 1.160~1.180 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2260 | 液狀或石蠟狀 | 300~700 | 1.180~1.200 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-5885B | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2260 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/135~137 | 6~9 | 30~38 | 0.20~0.23 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑SM-2的加入量為250±5g/18kg The adding content of SM-2 should be 250±5g / 18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at 23℃ | |||||||||||
物性值 | 0.40~0.45 | 85~92 | 50~63 | 320~400 | 30~35 | 300000次無裂口 | |||||||||||
Physical properties | 300000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
2
中硬度聚酯
Medium hardness polyester
HT-5606/F-2180 |
1、特性:表面光亮,手感柔和 | |||||||||||||||||
Characteristic:smooth surface and good handle | |||||||||||||||||
2、用途:皮鞋、涼鞋 | |||||||||||||||||
Application:Sole for casual shoes and man shoes | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-5606 | 液狀或石蠟狀 | 800~1200 | 1.120~1.200 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2180 | 液狀或石蠟狀 | 200~600 | 1.190~1.210 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-5606 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2180 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/99~101 | 7~10 | 50~60 | 0.23~0.30 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑SM-2的加入量為240±5g/18kg The adding content of SM-2 should be 240±5g / 18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at 23℃ | |||||||||||
物性值 | 0.55~0.65 | 58~65 | 50~57 | 370~450 | 33~40 | 300000次無裂口 | |||||||||||
Physical properties | 300000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-5608B/F-2180 |
1、特性:中等密度,成型性好 | |||||||||||||||||
Characteristic: medium density and good moldability | |||||||||||||||||
2、用途:休閑鞋、涼鞋 | |||||||||||||||||
Application:Sole for casual shoes and man shoes | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-5608B | 液狀或石蠟狀 | 500~900 | 1.160~1.180 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2180 | 液狀或石蠟狀 | 200~600 | 1.190~1.210 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-5608B | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2180 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/116~118 | 9~11 | 40~60 | 0.22~0.25 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑SM-2的加入量為270±5g/18kg The adding content of SM-2 should be 270±5g / 18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at 23℃ | |||||||||||
物性值 | 0.46~0.55 | 60~65 | 48~55 | 350~450 | 32~37 | 300000次無裂口 | |||||||||||
Physical properties | 300000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-5650/F-2280 |
1、特性:成型性好,輕便 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:女鞋、休閑鞋 | |||||||||||||||||
Application: | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-5650 | 液狀或石蠟狀 | 800~1200 | 1.160~1.180 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2280 | 液狀或石蠟狀 | 200~600 | 1.180~1.200 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-5650 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2280 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/84.5~86.5 | 7~10 | 30~40 | 0.22~0.26 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑SM-2的加入量為300±5g/18kg The adding content of SM-2 should be 300±5g / 18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
水H2O 35±5g/18kg | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at 23℃ | |||||||||||
物性值 | 0.45~0.55 | 58~65 | 45~60 | 370~470 | 30~35 | 300000次無裂口 | |||||||||||
Physical properties | 300000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
3
聚酯型軟料
Soft polyester
HT-5830L/F-2580L |
1、特性:低硬度,手感好,耐寒性 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:連幫鞋和休閑鞋底 | |||||||||||||||||
Application: | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-5830L | 液狀或石蠟狀 | 800~1200 | 1.170~1.190 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2580L | 液狀或石蠟狀 | 300~700 | 1.180~1.200 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-5830L | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2580L | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/54.5~56.5 | 7~10 | 40~60 | 0.21~0.25 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑SM-2的加入量為300±5g/18kg The adding content of SM-2 should be 300±5g / 18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality 水H2O 50±5g/18kg | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at -20℃ | |||||||||||
物性值 | 0.42~0.50 | 30~40 | 30~50 | 500~700 | 15~25 | 40000次無裂口 | |||||||||||
Physical properties | 40000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-5835/F-2280 |
1、特性:低硬度,手感好,耐水解 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:連幫鞋和休閑鞋 | |||||||||||||||||
Application: | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-5835 | 液狀或石蠟狀 | 1000~1800 | 1.110~1.130 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2280 | 液狀或石蠟狀 | 200~600 | 1.180~1.200 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-5835 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2280 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/62~64 | 7~10 | 40~60 | 0.21~0.25 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑SM-2的加入量為350±5g/18kg The adding content of SM-2 should be 350±5g / 18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at 23℃ | |||||||||||
物性值 | 0.42~0.50 | 35~40 | 30~45 | 340~400 | 30~35 | 300000次無裂口 | |||||||||||
Physical properties | 300000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-6730/F-2180 |
1、特性:手感柔軟,成型性好 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:鞋墊 | |||||||||||||||||
Application: | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-6730 | 液狀或石蠟狀 | 800~1600 | 1.080~1.160 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2180 | 液狀或石蠟狀 | 200~500 | 1.190~1.210 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-6730 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2180 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/70~72 | 6~9 | 45~55 | 0.13~0.16 | 45~55 | 5~7 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑的加入量為260±5g/18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | ||||||||||||
Items | Molded density (g/cm3) | Hardness (Shore C) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | ||||||||||||
物性值 | 0.25~0.35 | 25~40 | 15~30 | 250~350 | 10~15 | ||||||||||||
Physical properties | |||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-6748/F-2280 |
1、特性:手感柔軟,撕裂性好 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:鞋墊、中底 | |||||||||||||||||
Application: | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-6748 | 液狀或石蠟狀 | 700~1200 | 1.080~1.160 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2280 | 液狀或石蠟狀 | 200~600 | 1.090~1.110 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-6748 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2280 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/73~75 | 6~9 | 45~55 | 0.14~0.18 | 45~55 | 5~7 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑的加入量為250±5g/18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | ||||||||||||
Items | Molded density (g/cm3) | Hardness (Shore C) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | ||||||||||||
物性值 | 0.35~0.40 | 50~60 | 14~30 | 250~350 | 20~26 | ||||||||||||
Physical properties | |||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-5340/F-2220 |
1、特性:手感好,低硬度,耐寒性好 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:耐寒鞋底、連幫鞋 | |||||||||||||||||
Application: | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-5340 | 液狀或石蠟狀 | 400~1200 | 1.170~1.190 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2220 | 液狀或石蠟狀 | 300~700 | 1.180~1.200 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-5340 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2220 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/63.5~65.5 | 7~10 | 50~70 | 0.27~0.32 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑的加入量為360±5g/18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at -25℃ | |||||||||||
物性值 | 0.42~0.52 | 30~40 | 30~50 | 500~700 | 15~25 | 40000次無裂口 | |||||||||||
Physical properties | |||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-6735/F-3210 |
1、特性:手感好、回彈性好、尺寸穩定性好 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:鞋墊、中底 | |||||||||||||||||
Application: | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-6735 | 液狀或石蠟狀 | 900~1500 | 1.060~1.140 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-3210 | 液狀或石蠟狀 | 200~500 | 1.160~1.180 | 19 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-6735 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-3210 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/48~52 | 6~9 | 38~50 | 0.14~0.18 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑SM-2的加入量為250±5g/18kg | |||||||||||||||||
◎水的加入量為100~130g/18kg The adding content of water should be 100~130g/18kg | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | ||||||||||||
Items | Molded density (g/cm3) | Hardness (Shore C) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | ||||||||||||
物性值 | 0.28~0.40 | 25~45 | ≥20 | ≥300 | 15 | ||||||||||||
Physical properties | |||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
4
勞保鞋
Resin for labor insurance shoes
HT-8950/F-2980 |
1、特性:低溫柔順性、高防滑特性 | |||||||||||||||||||
Characteristic:Low-temperature flexibility and high resistance to slip | |||||||||||||||||||
2、用途:勞保鞋中底、大底 | |||||||||||||||||||
Application::For safety shoes | |||||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||||
HT-8950 | 液狀或石蠟狀 | 1300~2100 | 1.140~1.180 | 18 | |||||||||||||||
liquid or waxy solid | |||||||||||||||||||
F-2980 | 液狀或石蠟狀 | 0 | 1.180~1.200 | 20 | |||||||||||||||
liquid or waxy solid | |||||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||||
HT-8950 | F-2980 | ||||||||||||||||||
60-70℃預熱6~8h | 60-70℃預熱8~12h | ||||||||||||||||||
Preheated at 60-70℃ for 6~8h | Preheated at 60-70℃ for 8~12h | ||||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||||
技術參數 | 40~45/40~45 | 大底 | 中底 | 7~10/6-7 | 45~55/35~40 | 大底 | 中底 | 40~45 | 3~5 | ||||||||||
Parameter | |||||||||||||||||||
100/58~60 | 100/66~68 | 0.6~0.7 | 0.27~0.35 | ||||||||||||||||
◎催化劑SM-2的加入量為大底:SM-2的加入量為220±5g/18kg 。中底:SM-2的加入量為320±5g/18kg 。 | |||||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||||
大底: 水H2O 水添加量為10±2 g/18kg | |||||||||||||||||||
中底:水H2O 水添加量為70±5 g/18kg | |||||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | DIN耐磨 | SRB防滑性 | ||||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | DIN abrasion resistance(mm3) | SRB slip resistance |
||||||||||||
物性值 | 大底 | 中底 | 大底 | 中底 | 大底 | 中底 | 大底 | 中底 | 大底/中底 | 大底 | 大底/中底 | ||||||||
Physical properties | 0.9 ~1 | 0.45~0.55 | 55~62 | 45~50 | ≥70 | ≥40 | ≥500 | ≥400 | ≥80/≥30 | ≤150 | ≥0.13(Heel) ≥0.18(Flat) |
||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-8850A/F-2180 |
1、特性:高粘結性,耐低溫性 | |||||||||||||||||||
Characteristic: | |||||||||||||||||||
2、用途:勞保鞋中底、大底 | |||||||||||||||||||
Application: | |||||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||||
HT-8850A | 液狀或石蠟狀 | 1400~2000 | 1.140~1.180 | 18 | |||||||||||||||
liquid or waxy solid | |||||||||||||||||||
F-2180 | 液狀或石蠟狀 | 300~500 | 1.180~1.200 | 20 | |||||||||||||||
liquid or waxy solid | |||||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||||
HT-8850A | 60-70℃預熱6~8h | ||||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||||
F-2180 | 60-70℃預熱8~12h | ||||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||||
技術參數 | 40~45/40~45 | 大底 | 中底 | 7~10 | 45~55 | 大底 | 中底 | 35~40 | 6~7 | ||||||||||
Parameter | |||||||||||||||||||
100/61.5~63.5 | 100/71.5~72.5 | 0.6~0.7 | 0.28~0.36 | ||||||||||||||||
◎催化劑SM-2的加入量為220±5g/18kg The adding content of SM-2 should be 250±5g / 18kg | |||||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||||
大底: 水H2O 20±5g/18kg | |||||||||||||||||||
中底:水H2O 50±5g/18kg | |||||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at -10℃ | |||||||||||||
物性值 | 大底 | 中底 | 大底 | 中底 | 大底 | 中底 | 大底 | 中底 | 中底 | 50000次無裂口 | |||||||||
Physical properties | 0.9~1.0 | 0.45~0.55 | 60~65 | 45~50 | >80 | >70 | >500 | >450 | >40 | 50000 times no crack | |||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-8255/F-2561 |
1、特性:高粘結力,手感好,耐寒性好 | |||||||||||||||||||
Characteristic: | |||||||||||||||||||
2、用途:雙密度勞保鞋和一次成型休閑鞋 | |||||||||||||||||||
Application: | |||||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||||
HT-8255 | 液狀或石蠟狀 | 1500~2200 | 1.120~1.180 | 18 | |||||||||||||||
liquid or waxy solid | |||||||||||||||||||
F-2561 | 液狀或石蠟狀 | 200~500 | 1.190~1.210 | 20 | |||||||||||||||
liquid or waxy solid | |||||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||||
HT-8255 | 60-70℃預熱6~8h | ||||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||||
F-2561 | 60-70℃預熱8~12h | ||||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||||
技術參數 | 40~45/40~45 | 大底 | 中底 | 6~10 | 50~60 | 大底 | 中底 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||||
100/74~76 | 100/79~81 | 0.4~0.5 | 0.25~0.35 | ||||||||||||||||
◎催化劑SM-2的加入量為250±5g/18kg The adding content of SM-2 should be 250±5g / 18kg | |||||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||||
大底: 水H2O 20±5g/18kg | |||||||||||||||||||
中底:水H2O 50±5g/18kg | |||||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at -10℃ | |||||||||||||
物性值 | 大底 | 中底 | 大底 | 中底 | 大底 | 中底 | 大底 | 中底 | 中底 | 50000次無裂口 | |||||||||
Physical properties | 0.8~1.0 | 0.45~0.65 | 55~75 | 40~60 | >80 | >45 | 350~450 | 300~400 | >20 | 50000 times no crack | |||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-8801G/F-2580G |
1、特性:高粘結力,耐寒性好,表皮光亮 | |||||||||||||||||||
Characteristic: | |||||||||||||||||||
2、用途:耐寒勞保鞋和一次性成型休閑鞋 | |||||||||||||||||||
Application: | |||||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||||
HT-8801G | 液狀或石蠟狀 | 1000~1800 | 1.116~1.124 | 18 | |||||||||||||||
liquid or waxy solid | |||||||||||||||||||
F-2580G | 液狀或石蠟狀 | 300~700 | 1.180~1.200 | 20 | |||||||||||||||
liquid or waxy solid | |||||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||||
HT-8801G | F-2580G | ||||||||||||||||||
60-70℃預熱6~8h | 60-70℃預熱8~12h | ||||||||||||||||||
Preheated at 60-70℃ for 6~8h | Preheated at 60-70℃ for 8~12h | ||||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||||
技術參數 | 40~45/40~45 | 大底 | 中底 | 6~10 | 35~50 | 大底 | 中底 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||||
100/74~76 | 100/81~83 | 0.45~0.55 | 0.23~0.33 | ||||||||||||||||
◎催化劑SM-2的加入量為300±5g/18kg The adding content of SM-2 should be 300±5g / 18kg | |||||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||||
大底: 水H2O 20±5g/18kg | |||||||||||||||||||
中底:水H2O 80±5g/18kg | |||||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at -20℃ | |||||||||||||
物性值 | 大底 | 中底 | 大底 | 中底 | 大底 | 中底 | 大底 | 中底 | 中底 | 50000次無裂口 | |||||||||
Physical properties | 0.8~1.0 | 0.45~0.65 | 60~75 | 50~65 | 76~85 | 42~51 | 380~460 | 300~400 | 30~35 | 50000 times no crack | |||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
5
耐寒聚酯
Coldtolerant?polyester
HT-8840/F-2240 |
1、特性:中硬度、耐低溫性 | |||||||||||||||||
Characteristic:Medium to low hardness,low temperature resistance | |||||||||||||||||
2、用途:連幫鞋、休閑鞋底 | |||||||||||||||||
Application:For direct injection shoes and casual shoes | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-8840 | 液狀或石蠟狀 | 900~1700 | 1.150~1.170 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2240 | 液狀或石蠟狀 | 200~600 | 1.180~1.200 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-8840 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2240 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 43~48/43~48 | 100/65~68 | 7~10 | 50~70 | 0.26~0.30 | 40~45 | 2.5~3.5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑SM-2的加入量為300±10g/18kg The adding content of SM-2 should be 300±10g / 18kg | |||||||||||||||||
◎水的加入量為70±5g/18kg The adding content of water should be 70±5g/18kg | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 |
|||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at -20℃ | |||||||||||
物性值 | 0.42~0.52 | 40~50 | 30~45 | 500~700 | 15~25 | 50000次無裂口 | |||||||||||
Physical properties | 50000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-5930G/F-2120 |
1、特性:中低硬度、高粘結性、耐低溫 | |||||||||||||||||
Characteristic:Medium to low hardness, excellent adhesive property, low temperature resistance | |||||||||||||||||
2、用途:聯邦鞋、休閑鞋、旅游鞋 | |||||||||||||||||
Application:For direct injection shoes,casual shoes and sport shoes | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-5930G | 液狀或石蠟狀 | 1000~1500 | 1.140~1.160 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2120 | 液狀或石蠟狀 | 200~600 | 1.180~1.200 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-5930G | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2120 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/62~64 | 7~10 | 40~50 | 0.21~0.25 | 40~45 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑C-3的加入量為300±5g/18kg The adding content of C-3should be 300±5g /18kg | |||||||||||||||||
◎水的加入量為80±5g/18kg The adding content of water should be 80±5g/18kg | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at -20℃ | |||||||||||
物性值 | 0.41~0.45 | 33~40 | 20~30 | 500~700 | 25~45 | 50000次無裂口 | |||||||||||
Physical properties | 50000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-2004/F-2580 |
1、特性:中硬度,手感好,耐寒性好 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:耐寒鞋底 | |||||||||||||||||
Application: | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-2004 | 液狀或石蠟狀 | 2000~2800 | 1.150~1.170 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2580 | 液狀或石蠟狀 | 300~700 | 1.180~1.200 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-2004 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2580 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/94~95 | 7~10 | 50~60 | 0.27~0.31 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑SM-2的加入量為220±5g/18kg The adding content of SM-2 should be 220±5g / 18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at -20℃ | |||||||||||
物性值 | 0.60~0.65 | 57~62 | 38~45 | 460~530 | 33~38 | 50000次無裂口 | |||||||||||
Physical properties | 50000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
6
透明料
Transparent material
HT-2005/F-2580 |
1、特性:中硬度,透明料 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:透明鞋底 | |||||||||||||||||
Application: | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-2005 | 液狀或石蠟狀 | 1000~1600 | 1.150~1.170 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-2580 | 液狀或石蠟狀 | 300~700 | 1.180~1.200 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-2005 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-2580 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/76~78 | 0.9~1.2 | 45~55 | 5~7 | ||||||||||||
Parameter | |||||||||||||||||
◎催化劑SM-2的加入量為300±5g/18kg The adding content of SM-2 should be 300±5g / 18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at -10℃ | |||||||||||
物性值 | 0.90~1.2 | 57~65 | 80~90 | 550~700 | 55~70 | 50000次無裂口 | |||||||||||
Physical properties | 50000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
7
聚醚型
Polyether
HT-4460/F-4200 |
1、特性:耐候性優良,低溫柔順性好 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:大底 | |||||||||||||||||
Application: | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-4460 | 液狀或石蠟狀 | 300~700 | 1.000~1.040 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-4200 | 液狀或石蠟狀 | 200~600 | 1.001~1.005 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-4460 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-4200 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/65~67 | 7~10 | 35~50 | 0.30~0.35 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑的加入量為400±5g/18kg The adding content of SM-2 should be 400±5g / 18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at -40℃ | |||||||||||
物性值 | 0.60~0.70 | 55~65 | 45~55 | 450~550 | 15~20 | 50000次無裂口 | |||||||||||
Physical properties | 50000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |
HT-4465/F-4230 |
1、特性:低溫柔順性好,防滑 | |||||||||||||||||
Characteristic: | |||||||||||||||||
2、用途:大底 | |||||||||||||||||
Application: | |||||||||||||||||
3、原液特性 Typical properties of PU matrix | |||||||||||||||||
品名 | 外觀 | 粘度 | 密度 | 包裝 | |||||||||||||
Name of products | Apperance | Viscosity (cps at 40℃) | Density (g/cm3 at 40℃) | Package(kg) | |||||||||||||
HT-4465 | 液狀或石蠟狀 | 300~700 | 1.000~1.040 | 18 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
F-4230 | 液狀或石蠟狀 | 200~600 | 1.001~1.005 | 20 | |||||||||||||
liquid or waxy solid | |||||||||||||||||
◎物料理想儲藏溫度:25℃以下 | |||||||||||||||||
4、物料預熱 Materials preheat | |||||||||||||||||
HT-4465 | 60-70℃預熱6~8h | ||||||||||||||||
Preheated at 60-70℃ for 6~8h | |||||||||||||||||
F-4230 | 60-70℃預熱8~12h | ||||||||||||||||
Preheated at 60-70℃ for 8~12h | |||||||||||||||||
5、成型條件及反應參數 Typical processing parameters &Reaction parameter | |||||||||||||||||
項目 | 物料溫度 | 混合比 | 乳化時間 | 起發時間 | 泡沫密度 | 模具溫度 | 脫模時間 | ||||||||||
Items | HT/F Materials temperature(℃) | Mixing ratio (HT+SM)/F(By weight) | Cream time(s) | Rise time(s) | Free foam density (g/cm3) | Mold temperature(℃) | Demolding time( min) | ||||||||||
技術參數 | 40~45/40~45 | 100/53~55 | 7~10 | 40~50 | 0.70~0.75 | 45~55 | 3~5 | ||||||||||
Parameter | |||||||||||||||||
◎催化劑的加入量為340±5g/18kg The adding content of SM-2 should be 340±5g / 18kg | |||||||||||||||||
◎水和硬化劑根據實際需要添加 The adding content of water and hardener should added to the reality | |||||||||||||||||
6、制品性能 Physical properties | |||||||||||||||||
項目 | 成型密度 | 硬度 | 拉伸強度 | 伸長率 | 撕裂強度 | 耐折試驗 | |||||||||||
Items | Molded density (g/cm3) | Hardness (Shore A) | Tensile strength (kg/cm2) | Elongation(%) | Tear strength (kg/cm) | Flexing Endurance Test at -40℃ | |||||||||||
物性值 | 0.80~1.10 | 60~65 | 30~35 | 350~400 | 12~16 | 50000次無裂口 | |||||||||||
Physical properties | 50000 times no crack | ||||||||||||||||
◎該物性數據是對6mm厚的試片測試獲得的數據。 | |||||||||||||||||
These physical data are acquired by testing a sample of 6mm thick. | |||||||||||||||||
◎自由泡沫密度會依季節(溫度、濕度)不同而變化。 | |||||||||||||||||
Free rise density may vary with temperature &humidity. | |||||||||||||||||
◎脫模時間會隨成品厚度的增加而延長。 | |||||||||||||||||
Demold time may be prolonged with the increase of sold thickness. | |||||||||||||||||
◎以上數據及作參考,具體數據以實際操作為準,如需其它物性指標,請與我公司聯系。 | |||||||||||||||||
Data listed are just for reference。The detail data are subject to operation.If other request on physical properties,please contact us. |